The SDC-SSD30AG provides all key Summit brand hardware and software capabilities in a SDIO system-in-package (SiP) form factor. With a length and width of only 15 millimeters and a weight of 1 gram, the SDC-SSD30AG module is suitable for all ASDs, and especially ideal for small or lightweight devices. No other Wi-Firadio module can match the range, robust secuirty, seamless mobility, and easy administration of the SSD30AG module.

Note: This product has reached end of production and is available on a limited basis only. Last time buy purchase orders must be placed by June 1, 2016.


Wi-Fi Alliance:802.11a, 802.11b, 802.11g. WPA Enterprise, WPA2 Enterprise. Cisco Compatible Extensions (Version 4).
Chipset (Wireless)
Atheros AR6002
Connector Type
Dimension (Height - mm)
2.6 mm
Dimension (Length - mm)
15 mm
Dimension (Width - mm)
15 mm
Input Power
Requirements 1.8, 2.6, or 3.3 VDC +/- 10%
Maximum Electrostatic Discharge
4 kV
Operating Channels (2.4 GHz)
ETSI:13 (3 non-overlapping). FCC:11 (3 non-overlapping). MIC:14 (4 non-overlapping). KC:13 (3 non-overlapping)
Operating Channels (5 GHz)
ETSI: 19 non-overlapping. FCC: 23 non-overlapping. MIC: 8 non-overlapping. KC: 12 non-overlapping
Operating Humidity
10 to 90% (non-condensing)
Operating Systems Supported
Windows Mobile, CE
Power Consumption
802.11a Transmit: 381 mA (1257 mW). Receive: 116 mA (383 mW). Standby: 3 mA (10 mW) 802.11b/g Transmit: 324 mA (1069 mW) Receive: 93 mA (307 mW) Standby: 2 mA (7 mW).
Media Access: Carrier sense multiple access with collision avoidance (CSMA/CA)
Standards: Wireless Equivalent Privacy (WEP), Wi-Fi Protected Access (WPA), IEEE 802.11i (WPA2). Encryption: Wireless Equivalent Privacy (WEP, RC4 Algorithm), Temporal Key Integrity Protocol (TKIP, RC4 Algorithm), Advanced Encryption Standard (AES, Rijndael Algorithm). Encryption Key Provisioning: Static (40 and 128 bit lengths). Pre-Shared (PSK)Dynamic: 802.1X Extensible Authentication Protocol. Types: EAP-FAST, EAP-TLS, EAP-TTLS, PEAP-GTC, PEAP-MSCHAPv2, PEAP-TLS, LEAP
Storage Humidity
10 to 90% (non-condensing)
Transmit Power (Max)
.04 oz (1 g)
Wireless Specification
868 MHz
Part NumberAntenna OptionsAntenna TypeChipset (Wireless)ComplianceConnectorData RateDimension (Height - mm)Dimension (Length - mm)Dimension (Width - mm)EncryptionFrequency Range (Max)Frequency Range (Min)Frequency Range 2 (Max)Frequency Range 2 (Min)Input PowerLogical InterfacesNetwork ArchitectureOS/SoftwareOperating Channels (2.4 GHz)Operating Channels (5 GHz)Operating HumidityOperating Systems SupportedPower ConsumptionProduct TypeProtocolsSecurityStorage HumiditySystem ArchitectureTechnologyTransmit Power (Max)WeightWi-Fi VersionWireless Specification
End of Life (EOL)
u.FL Connector (x2) External Atheros AR6002 ETSI SMT Up to 54 Mbps 2.6 mm15 mm15 mmWEP/TKIP/AES 2495 MHz2400 MHz5825 MHz5150 MHz3.3 VDC +/- 10% SDIO Infrastructure and ad hoc Windows Mobile, Windows CE ETSI:13 (3 non-overlapping). FCC:11 (3 non-overlapping). MIC:14 (4 non-overlapping). KC:13 (3 non-overlapping) ETSI: 19 non-overlapping. FCC: 23 non-overlapping. MIC: 8 non-overlapping. KC: 12 non-overlapping 10 to 90% (non-condensing) Windows Mobile See datasheets. Embedded Module Media Access: Carrier sense multiple access with collision avoidance (CSMA/CA) Standards: Wireless Equivalent Privacy (WEP) 10 to 90% (non-condensing) Hosted 802.11abg +18 dBm .04 oz (1 g) 802.11 a/b/g 802.11 a/b/g Enterprise Wi-Fi


Name Part Type Last Updated
EU Standards Updates.pdf All Certification 01/17/2019
FCC DTS Grant - MSD30AG.pdf All Certification 01/17/2019
FCC UNII Grant - MSD30AG.pdf All Certification 01/17/2019
IC 6616A - MSD30AG.pdf All Certification 01/17/2019
MIC WW - MSD30AG.pdf All Certification 01/17/2019
MIC-GZ - MSD30AG.pdf All Certification 01/17/2019
Declaration of Conformity SSD30AG.pdf All Certification 01/17/2019
Wi-Fi Alliance Certificate - SSD30AG.pdf All Certification 01/17/2019
FCC DTS - MSD30AG.pdf All Certification 01/17/2019
FCC UNII - MSD30AG.pdf All Certification 01/17/2019
EN 301 489-1-17 - MSD30AG - 2017-03.pdf All Certification 01/17/2019
EN 60950-1 - MSD30AG and SSD30AG (2017).pdf All Certification 01/17/2019
FCC Part 2.1091 Test Report (RF Exposure) - MSD30AG.pdf All Certification 01/17/2019
FCC Part 15.407 Test Report (C2PC) - MSD30AG.pdf All Certification 01/17/2019
FCC C2PC Grant - MSD30AG.pdf All Certification 01/17/2019
EN 62311 (2008) - RF Exposure - MSD30AG.pdf All Certification 01/17/2019
EN 301 893 (5 GHz) v2.1.0 - MSD30AG - 2017.pdf All Certification 01/17/2019
EN 301 893 (DFS) v2.1.0 - MSD30AG - 2017.pdf All Certification 01/17/2019
EN 300 328 (2.4 GHz) v2.1.1 - MSD30AG - 2017.pdf All Certification 01/17/2019
EU Declaration of Conformity - MSD30AG and SSD30AG - 2017.pdf All Certification 01/17/2019
CE Certificate - SD30AG - 2017.pdf All Certification 01/17/2019
EN 301 893 (5GHz) v1.8.1 - MSD30AG (ER431802-02AS).pdf All Certification 01/17/2019
EN 301 893 (DFS) v1.8.1 - MSD30AG (EY560301).pdf All Certification 01/17/2019
EN 301 893 (5G) SD30AG - v2-1-1 (ER431802-04AN).pdf All Certification 01/17/2019
EN 301 893 (DFS Client) v2-1-1 SD30AG (EY431802-04).pdf All Certification 01/17/2019
RoHS 3 Compliance - Wi-Fi Products All Certification 02/16/2022
Frequently Asked Questions - Wi-Fi Software Developers Kit.pdf All Documentation 01/17/2019
Quick Start Guide - Wi-Fi on Windows XP.pdf All Documentation 01/17/2019
User Guide - Summit Software Developers Kit.pdf All Documentation 01/17/2019
Usage Notes - Laird Wi-Fi Software.pdf All Documentation 01/17/2019
Datasheet - SSD30AG.pdf All Documentation 01/17/2019
EOL Announcement - SSD30AG and MSD30AG.pdf All Documentation 01/17/2019
Quick Start Guide - Wi-Fi on Windows CE and Mobile.pdf All Documentation 01/17/2019
User Guide - Laird Connection Manager.pdf All Documentation 01/17/2019
Software Integration Guide - For Windows Embedded.pdf All Documentation 01/17/2019
User Guide - Laird Regulatory Utility.pdf All Documentation 01/17/2019
SD30 21 3 1 11.zip All Software 01/17/2019
CS-RN-30AG v21 3 1 11.pdf All Software 01/17/2019


What is Laird Connectivity's product lifecycle EOL and PCN policy?

Laird Connectivity is committed to the long-term supply of all its standard embedded wireless modules and packaged products. Laird Connectivity’s products are specifically designed to meet the needs of the industrial and medical markets, which typically require 7 – 10 years product lifecycle. Although Laird Connectivity can’t guarantee that a component used in our products will not be obsoleted and cannot be reasonably substituted, Laird Connectivity can assure customers we will continue to sell our product when we have customer demand and can obtain the necessary components to build our products.

View our full policy here. 

Where can I find the SDK for the Enterprise Wi-Fi Radios?

Where can I find the SDK for the Enterprise Wi-Fi Radios? If there is no SDK available for download in the product's Software Downloads section then the SDK will be in the release .zip folder.  



What is the step to load SD module in windows?

1) The SD host controller driver (their driver, not ours) detects that a device is on the SDIO bus and signals the SD bus driver (a Microsoft driver) 2) The SD bus driver enumerates the card to determine what device it is and what client driver needs to be loaded.  The bus driver does this at a low clock frequency because it doesn?t yet know what bus speed the client device can support.  Note that the host controller driver is the one that actually performs all accesses to the card as it is the one that manages the actual SDIO controller hardware on the host platform.  The bus driver is accessing the card via the host controller driver. 3) The SD bus driver determines that our driver is the ?client driver? registered for the card by reading the vendor/product IDs from the card and looking up that information in the registry.  Our driver is registered for that combination of VID/PID. 4) The bus driver loads the client driver, which in this case is our driver. 5) The client driver continues initialization, which includes accessing the card itself by making calls to the SD bus driver which passes those calls on to the host controller driver which implements the actual card access via the host controller itself in the host CPU.  It?s important to note that the client driver (us) only requests that a card access be made; it is the host controller driver that implements the access via the host controller on the host CPU.   6) Very early in the initialization sequence the client driver (us) makes a call to the bus driver to configure the bus speed, bus width etc.  The speed is the lower of what the card supports and what the host controller supports on that slot.  From that point on, all accesses are occurring at a much higher bus speed. 7) The card continues initialization, which includes downloading the firmware and then enabling interrupts.  From this point on, interrupts have to be working for the card to function properly.



What is the ECCN for "Summit" Wi-Fi radios?

The ECCN for the radios listed, which comprise the "Summit" line of Wi-Fi radios, is 5A002.

Does Laird Connectivity provide 3D files for modules?

Laird Connectivity provides 3D files (STEP) files for most but not all of it's modules.  Based on the nature of the information in the files, in most cases Laird requires a login to access these files as well as layout files and software/firmware downloads.  As such, for most modules, the 3D files are found under the Software Downloads tab of the product page.  The page offers a credentials request link for customers who need credentials.  In most cases, the credentials are provided via return email within about 10 minutes. Please contact support if you have any additional questions or have any issues accessing our downloads.

Do we recommend conformal coating your modules?

We highly do not recommend conformal coating the radio module. If you plan on encapsulating the radio module in a potting compound or conformal coating, you must assure that the compound in liquid or solid form does not enter under the shield where there are sensitive RF components. Some of the capacitive and inductance values are as low (pF and nH) and could be sensitive to contacting materials such as potting compounds. There are potting compounds and conformal coatings which have very good dielectric constants and are suitable for 2.4 GHz potting applications, however, when you apply any of these, they were not accounted for in the circuit design and might reduce performance of the device (or all together cause it not to function).  You should run tests on their particular potting compound and evaluate radio's performance and range.  Also, it's worth mentioning that applying any compound, conformal coating or potting directly to the module WILL void the warranty. If your application requires 100% sealing of the radio module, there is a way to do this very successfully without impacting the module performance. Simply place the module on your PCB. Place a plastic cover over the module (like a hat), make the cover large enough to cover the whole module. Apply glue around the bottom perimeter of the cover where it sits on the PCB. This allows the module to function in free air-space while there is a complete seal around it. This information is only for reference and we recommend you should conduct your own testing with your prototype of your end application to find the best suitable fit for your design.  

How many reflows do you recommend for your modules?

We only recommend reflowing our modules once as it can damage the module and void the warranty.

What are the available CAD file formats?

Laird Connectivity provides layout files PADS and PADS ASCII formats. The ASCII files will import to Altium (and Protel varients) as well as Cadence (Orcad and Allegro) CAD packages. As far as we know, there is no way to import to Eagle CAD. Please be sure to use the .asc file for PCB and the .txt file for the schematic when importing to Altium. Laird Connectivity uses ORCAD for schematics (Gerbers). 

What's the recommended process to clean modules?

The recommended cleanser is "hydrocarbon cleaning oil", which can be used to clean the RF shield and PCB. We do not recommend the use of alcohol as it doesn't work as well and could leave residue on the boards.  

Are the roam settings used to switch between profiles within the auto profile list?

Yes, here is an example. 1. The auto profile list contains SSID_1 and SSID_2 2. Device is connected to SSID_1 3. RSSI drops below roam trigger, the radio scans for other APs and finds SSID_2 is a better candidate 4. The radio disconnects from SSID_1 and connects to SSID_2

What build should be used for EN 301 893 1.8.1 and EN 301 893 1.7.1 testing?

For the 30AG, we recommend the cab build or later for both test cases. For the 40NBT, use cab build or later. As for the 45N, cab build from can support both test cases.

Following WPA / WPA2 authenticated failure, scu_tray will pop up a message indicating authentication failure. How do I enable/disable this feature?

You can modify this feature by creating a new registry called ?NotifyAttempts? under ?hklm/software/Laird/ScuTray?, this allows you to disable / enable the pop-up message for WPA / WPA2 authentication and even set the number of attempts before notification. -DWORD: NotifyAttempts -Values: 0 (disabled); NOT 0 (the number of attempts before notification)

How do I troubleshoot the status information in LCM / SCU?

For the 10, 15, 30, and 40 series, the status of the LCM / SCU can be in one of two states, "non-associated? and ?associated". Once the radio has associated with an AP, it will move from "non-associated? to ?associated". If WPA / WPA2 authenticates failure, the status will switch between "non-associated? and ?associated". If authentication occurs without an IP the radio cannot be identified from the status field -- you will need to check in the IP field. For the 45 and 50 series, the status in LCM / SCU can be in one of three states, "Not Associated", "Associated", and "Connected?. Associated with no IP is a valid state for our radios to attempt to reconnect with an invalid PSK. Once the radio has associated with an AP, it will move from "not associated? to ?associated". Only after the radio authenticates and has an IP will it move to the "Connnected" state. In the case of WPA or WPA2 authenticated failure or authentication without an IP the radios will remain  in an "associated" state.

Does NDIS5 or NDIS6 run in Laird's WEC7 release?

NDIS5 runs Laird's WEC7 release.

Can CE5 and CE6 support SHA-2?

No, the patch that supports SHA-2 is in the Windows Embedded Compact 7 Monthly Update (April 2016). Prior to that, the OS itself doesn't support it.

How do you keep the tray icon off permanently in CE/WM platform?

Setting the following registry to 0 can achieve this: HKLM\Comm\SDCCF10G1\Parms\Configs\GlobalConfig DWORD: trayIcon - 0 = Hide Icon - Non-0 = Show Icon

Before LCM detects a Wi-Fi radio, how do I hard code the radio module it would use?

The radio chipset value is written by the driver when it loads, and indicates which radio is actually installed. LCM uses this value to determine some parameters that vary between radio types. If you want to hard code the Wi-Fi radio before the driver loads, you can do so with this registry: [HKEY_LOCAL_MACHINE/Comm/SDCCF10G1/Parms/Configs/GlobalConfig] "RadioChipSet"=dword:00000006 The values for that registry key are in the sdc_sdk.h as follows: typedef enum _RADIOCHIPSET { RADIOCHIPSET_NONE = 0, RADIOCHIPSET_SDC10 = 1, //BCM4318 RADIOCHIPSET_SDC15 = 2, //BCM4322, RADIOCHIPSET_SDC30 = 3, //AR6002, RADIOCHIPSET_SDC40L = 4, //BCM4319, RADIOCHIPSET_SDC40NBT = 5, //BCM4329, RADIOCHIPSET_SDC45 = 6, //AR6003, RADIOCHIPSET_SDC50 = 7, //AR6004, } RADIOCHIPSET;

mandatory/optional input for EAP type

mandatory/optional input for EAP type   EAP credentials Mandatory input Optional input LEAP User name, user password   EAP FAST User name, user password PAC file, FAC password PEAP MSCHAP User name, user password CA cert PEAP GTC User name, user password CA cert EAP TLS User name, user cert CA cert EAP TTLS User name, user password CA cert PEAP TLS User name, user cert CA cert   Note 1: this settings should be read in user perspective but not for actual implementation. For example, when a user does not input PAC file, it will use auto PAC provisioning. If a user inputs it, it will do a manual PAC provisioning. Note 2: user password is not used for TLS but only user cert is used instead.    


In EAP-TLS, there is a setting of username. What is the purpose of it? Will it be used during the authentication? Does it need to be the same as in CA?

EAP-TLS is a tunnel authentication. outer identity: this is the User-Name in the RADIUS packet and visible to all intermediate parties inner identity: this is the actual user identification. It is only visible to the user himself and the Identity Provider The user cert is issued to a user identified by the username, so the username has to be configured so we know which user cert we should be using for the authentication. By default, the username is also used during authentication as the outer identity which gets sent in the identity response packet.


What are the reasons for the null packets in an RF trace?

There are two reasons to send out null packets with p bit enabled. 1. Its RSSI has crossed over the Roam Trigger and the client radio is supposed to start scanning for a new AP. 2. The client radio is running one of our power-save modes (Fast or Max) and is going to sleep for a brief (e.g. 20 ms) period and is telling the AP so it will buffer traffic for it while it sleeps. After a radio has slept for some period of time (defined as the interval between DTIM periods) it is supposed to wake up and indicate to the AP that it is awake by sending a null packet with the P-bit turned off. The radio should only wake if it has traffic to send or it sees from the DTIM in the AP?s beacons that the AP has traffic to send to it.


Does Laird recommend ways to suspend/resume for Wi-Fi radios?

Method 1: Radio driver is asked by power manager to go to low power state Suspend/resume without cutting power to radio Method 2: Radio driver is asked by power manager to go to low power state Cut power to radio Suspend/ Resume Reapply power to radio Eject/insert radio Note 1: Method 1 is the simplest way to deal with suspend/resume, but the OEM needs to consider the current consumption of the radio at a low power state. For example, current consumption for the 40NBT is 7.7mA and for the 45N it is 200uA. Note 2 : In general, method 1 is more recommended because method 2 may cause a delay to make the radio reconnect after resume.


What is the difference between sdcgina.exe and sdc_gina.exe?

sdcgina.exe vs sdc_gina.exe : sdcgina.exe spawns all of the components we need (e.g. supplicant, scutray). sdc_gina.exe is a UI application that, for example, pops up when the credentials must be input.

DFS channels in KCC

The following channels require DFS in Korea KCC/KC domain. Channel Frequency MHz 52 5260 56 5280 60 5300 64 5320 100 5500 104 5520 108 5540 112 5560 116 5580 120 5600 124 5620


What connector types do your Wi-Fi radios support?

A list of our radios and supported connector types can be found here: WiFi + Bluetooth Modules

What is the difference between eap-mschapv2 and mschapv2 in EAP_TTLS?

With EAP-MS-CHAPv2, the data sent in tunnel will be encapsulated as EAP-MESSAGE AVP (attribute-value pair). In the case of MS-CHAPv2, there is no such extra encapsulation it is just the MS-CHAPv2 message.


KCC domain

The attached document is the list current channels for the KCC domain as of 2015. In document, red means DFS required.

As the PMKcaching, two options in the setting, standard or opmk. What is the definition of these two options?

Standard: indicates PMK Caching: This means that the 802.1x authentication can be skipped on an access point that a client has already authenticated to once before. Only the 4-way handshake needs to happen. This is useful for a client that needs to reconnect to an access point that it roamed away from previously, due to signal loss etc. However, if a client has not roamed to a particular access point during its current working session, it must then authenticate to that specific access point using 802.1x. PMK Caching is the method defined in the 802.11x (WPA/WPA2) specification. Opportunistic Key Caching: With this method, a client device can skip the 802.1x authentication with an access point after a full authentication,and only needs to perform the 4 way handshake when roaming to access points that are centrally managed by the same WLC in an LWAPP or other controller-based infrastructure. This means that the client doesn't need to authenticate with access points that it wants to roam to, as long as the client has authenticated successfully to at least one of the access points in the same zone as the access point that handled the previous successful authentication. In this case, the PMK identifier has been cached at a central location, like the WLC (or wireless switch.) With OKC, the client must support this method for it to be used, even if the infrastructure has been configured with OKC enabled.

Which EAP types Laird supports in CCKM?

CCKM is supported with all EAP types Laird supports?LEAP, EAP-FAST, PEAP-MSCHAPv2, PEAP-GTC, PEAP-TLS, EAP-TLS and EAP-TTLS. ACS supports all of the EAP types except EAP-TTLS. However, supporting CCKM is not dependent on using ACS as the RADIUS server. Laird can do CCKM with any RADIUS server since CCKM support is in the wireless infrastructure.

Become a Laird Connectivity Customer and Gain Exclusive Access to Our Design Services Team

  • Antenna Scans
  • Antenna selection and placement
  • Custom antenna design
  • Worldwide EMC testing / certifications
  • Embedded RF hardware / firmware design
  • Cloud architecture and integration
  • Mobile application development
  • Product & Industrial Design

Talk to an Expert

Buy Now

Distributor Part In Stock Region Buy


Distributor Phone Number Region Website
Alpha Micro UK Only +44 1256-851770
EMEA Website
Arrow Electronics 1-855-326-4757
+44 2039 365486
APAC, North America, South America, EMEA Website
Avnet 1-480-643-2000
+44 1628 512900
APAC, North America, South America, EMEA Website
Braemac Australia, New Zealand, South East Asia +61 2 9550 6600
+64 9 477 2148
APAC Website
Cal-Chip Connect 1-215-942-8900
North America Website
Digi-Key 1-800-344-4539
North America, South America, APAC, EMEA Website
EBV Elektronik EMEA Website
Farlink Technology China, Hong Kong +86 13266922199
APAC Website
Farnell 1-800-936-198
+44 3447 11 11 22
EMEA Website
Future Electronics 1-800-675-1619
North America, South America, APAC, EMEA Website
Glyn +49-6126-590-0
EMEA Website
Jetronic China, Hong Kong and Taiwan 852-27636806 
APAC Website
Laird Connectivity 1-847-839-6925
+44 1628 858941
North America, South America, APAC, EMEA Website
M2M Germany +49-6081-587386-0
EMEA Website
Martinsson +46 8 7440300
EMEA Website
McCoy South East Asia +65 6515 2988
APAC Website
Mouser 1-800-346-6873
+44 1494 427500
North America, South America, APAC, EMEA Website
RS Components +852-2421-9898
+44 3457-201201
North America, South America, APAC, EMEA Website
Ryoyo Japan +81-3-3543-7711
APAC Website
Supreme Components International India, South East Asia +65 6848-1178
APAC Website
Symmetry Electronics 1-866-506-8829
North America Website
Tekdis Australia and New Zealand +61 3 8669 1210
APAC Website
Telsys +972 3 7657666
EMEA Website