Support We're here to help. Browse our FAQs, videos, and other resources to find the answers you need. FAQ How to configure Packet Trace Interface for Bluetooth Low Energy traffic capture FAQ How to: permanently securing the Lyra device FAQ How to generate signed apploader and application firmware images using private key FAQ How to add service UUID to advertising data of implemented by Silicon Labs adapted GATT service FAQ How to enable CMSIS-PACK support in IAR for Silicon Labs devices FAQ How to generate IAR soc_empty project FAQ How to generate GCC Makefile for soc_empty project FAQ Firmware update of the application image using Segger J-Link and SWD interface FAQ Firmware update of the bootloader using Segger J-Link and SWD interface FAQ Steps to generate bootloader using Simplicity Studio for Lyra BLE modules FAQ Firmware update over UART using UART XMODEM Bootloader FAQ Firmware update over UART using BGAPI UART DFU Bootloader FAQ How to build, debug bootloader project for Lyra modules FAQ How to flash images to the Lyra device using commander utility FAQ How to generate public and private keys using Simplicity Studio Commander FAQ How to store public key into device Flash FAQ How to generate signed bootloader image using private key Blog The Road to WiFi 6E Part 4: Device Density FAQ Description for GEKO bootloader files and security keys, which are generated for Lyra device FAQ How to perform OTA update of Lyra devices using EFR Connect FAQ Silicon Labs Bluetooth Stack Features for Lyra Devices FAQ TX Power Limitations on Lyra devices for Regulatory Compliance (ETSI, FCC) FAQ Extended list of code examples for Lyra devices FAQ Firmware development - extending SOC EMPTY project FAQ How to get started with developing firmware for Lyra BLE modules FAQ How can I read out the MAC address from a BLE module during test/production? Videos Using External Antennas with the Lyra S DVK White Papers FASTER, SIMPLER, AND MORE SECURE: How a System-on-Module Design Strategy Can Produce Faster, Simpler Design Cycles FAQ Why are the LEDs of my RS1xx with external temperature probe constantly on and it does not join the LoRaWAN network? FAQ How to choose the right crystal and capacitors for your module design? Pagination Current page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 … Next page Next › Last page Last » Can't find the answer you're looking for? Open a Support Ticket