I am getting the message "brcmfmac: brcmf_usb_dl_cmd: usb_submit_urb failed -19" - how bad is that?

During the integration of a Sterling-LWB5+ Wifi module with USB interface often the occurance of message "brcmfmac: brcmf_usb_dl_cmd: usb_submit_urb failed -19" is obeserved.

This by itself is not harmful as it means that a USB transaction did not complete on the USB bus.

It can happen during initialization after the USB firmware has been downloaded and the module is not ready to be polled yet.

It should not be seen as an error but rather as a message.
Normal Wifi operation can still be avaiable.