How can I check the Vela IF820 DVK/Dongle RP2040 firmware?

The Vela  IF820 DVK uses a RP2040 to provide UART com ports for the DVK.

You can check the version of RP2040 firmware using the following, which assumes you have Python and pyocd installed.

pyocd list -v -v -v

which should return the RP2040 firmware of all boards currently connected which should look something like this

PS C:\Python311> pyocd list -v -v -v

0000733 D Project directory: C:\Python311 [session]

0001190 D CMSIS-DAP v2 probe E6620CD64F488232: firmware version 1.3.0+1694472875, protocol version 2.1.1 [dap_access_cmsis_dap]

0001280 D CMSIS-DAP v2 probe E6625C05E767202F: firmware version 1.3.0+1694472875, protocol version 2.1.1 [dap_access_cmsis_dap]

0001358 D CMSIS-DAP v2 probe E6625C05E789602C: firmware version 1.3.0+1694472875, protocol version 2.1.1 [dap_access_cmsis_dap]

  #   Probe/Board                              Unique ID          Target

------------------------------------------------------------------------------

  0   Laird Connectivity DVK Probe CMSIS-DAP   E6620CD64F488232   ✔︎ cortex_m

      Laird Connectivity                       Module


  1   Laird Connectivity DVK Probe CMSIS-DAP   E6625C05E767202F   n/a


  2   Laird Connectivity DVK Probe CMSIS-DAP   E6625C05E789602C   n/a

PS C:\Python311>

Categories

Products

Parts