Support We're here to help. Browse our FAQs, videos, and other resources to find the answers you need. FAQ How do I use the ST60-2230C or the SU60-2230C with only one antenna (SISO mode)? FAQ What IDE can I use with Zephyr for development and debug on the Pinnacle 100 or other Nordic-based modules? FAQ Do you have a hostless mode example for the Pinnacle 100? FAQ I've loaded a Nordic SDK application to the BL654PA and it isn't transmitting anything, why is that? FAQ How much Flash memory is available on the Pinnacle 100 for customer applications? FAQ Do I have to use the Segger branded debugger to program over the 2-wire SWD interface (JTAG) of the Nordic-based modules? FAQ Can I use USB on the BL654 if I'm using smartBASIC? FAQ The BL654 Dongle is not presenting as a Bluetooth Adapter FAQ How can BL65x module or dongle be used to receive data from a custom service running on another device? FAQ What is the JSON string to change the TX power in the BT510 outside of the BT510 app? Videos Getting Started with Zephyr on the BL652/BL654 Videos Episode 20: Unboxing and Using the RS1xx Open/Closed Sensor FAQ Is it safe to run a Laird Connectivity Bluetooth module through a PCBA wash cycle? FAQ Why am I not seeing temperature adverts from the BT510 sensor? FAQ Do any of the RAMP products support XON-XOFF? FAQ Is there a DVK for the BL651 module? FAQ Is it possible to use AT commands to configure BL651? FAQ Received Compile Error: (0x433)TOK_UNEXPECTED_TOKEN_IN_EXPR: Source : rc = BlePhySet(hConn, PhyTx, PhyRx, 0) when loading Sample Application from BL652 GitHub FAQ Why am I not seeing LINK light on my CL4490 when it is configured as a Server? FAQ How do I test layer 2 Bluetooth stability without setting up a profile on a Linux platform? FAQ Does the ST60/SU60 support FIPS 140-2? FAQ How do I enable monitor mode in 60 series? FAQ What kernel config should be set for ST60? FAQ How do I use hostapd to run AP mode on ST60 module? FAQ How do I integrate an ST60 module into an Ubuntu system? FAQ What encryption methods are supported in ad-hoc mode with ST60/SU60 series radios and how do I enable them? Blog Four Ways to Make Bluetooth Range Go Much, Much Farther Blog The RTOS for the Future of the IoT: Laird Connectivity and The Zephyr Project Blog 60 SOM Configurations: Using the SOM as the Core of Your Device Newsroom First of Its Kind Cellular Modem from Laird Connectivity Simplifies Bridging Cellular IoT to Bluetooth Sensors Pagination First page « First Previous page ‹ Previous Page 1 Page 2 Page 3 Page 4 Current page 5 Page 6 Page 7 Page 8 Page 9 … Next page Next › Last page Last » Can't find the answer you're looking for? Open a Support Ticket