Support We're here to help. Browse our FAQs, videos, and other resources to find the answers you need. Blog Now Available: Pinnacle 100 Cellular Modem Blog What Property Owners Need to Know About FirstNet FAQ Does the Sterling EWB support Enterprise Security? If so, what EAP types are supported. FAQ How do I set parity on the BL65x? FAQ Can I write/encode an NFC tag using the BL65x? FAQ Does the BT851 have the Bluetooth stack on board? FAQ Can I load a smartBASIC application to the BL654 451-00004 dongle? FAQ Can a BL65x firmware be updated OTA? FAQ How do I exit autorun on the BL654 dongle? FAQ Does Laird Connectivity have plans to get KCC approval for the Sterling-LWB, Sterling-EWB or the Sterling-LWB5 modules? FAQ While loading 7.1.0.9 release in ST60/SU60, driver indicates "/lib/firmware/lrdmwl/regpwr.db not found." What does it mean and how to handle it? FAQ What is KNOB (Key Negotiation of Bluetooth) attack vulnerability and how is it addresses in the SU60/ST60? FAQ How do I implement SDIO reset in ST60/SU60? FAQ Does the Kr00k vulnerability have an impact on the 40 series radios? FAQ How do I use the ST60-2230C or the SU60-2230C with only one antenna (SISO mode)? FAQ What IDE can I use with Zephyr for development and debug on the Pinnacle 100 or other Nordic-based modules? FAQ Do you have a hostless mode example for the Pinnacle 100? FAQ I've loaded a Nordic SDK application to the BL654PA and it isn't transmitting anything, why is that? FAQ How much Flash memory is available on the Pinnacle 100 for customer applications? FAQ Do I have to use the Segger branded debugger to program over the 2-wire SWD interface (JTAG) of the Nordic-based modules? FAQ Can I use USB on the BL654 if I'm using smartBASIC? FAQ The BL654 Dongle is not presenting as a Bluetooth Adapter FAQ How can BL65x module or dongle be used to receive data from a custom service running on another device? FAQ What is the JSON string to change the TX power in the BT510 outside of the BT510 app? Videos Getting Started with Zephyr on the BL652/BL654 Videos Episode 20: Unboxing and Using the RS1xx Open/Closed Sensor FAQ Is it safe to run a Laird Connectivity Bluetooth module through a PCBA wash cycle? FAQ Why am I not seeing temperature adverts from the BT510 sensor? FAQ Do any of the RAMP products support XON-XOFF? FAQ Is there a DVK for the BL651 module? Pagination First page « First Previous page ‹ Previous Page 1 Page 2 Page 3 Current page 4 Page 5 Page 6 Page 7 Page 8 Page 9 … Next page Next › Last page Last » Can't find the answer you're looking for? Open a Support Ticket