- Installing and configuring REPO the easy way!
- How to establish SSH connection with 60SOM and IG60 on builds without Network Manager entries for Ethernet?
- Does the LWB5+ support SoftAP?
- IG60 How to set static IP in Laird Linux
- When working with AT Interface why am I not able to get the module down to 2uA low power mode documented in the Lower Power Mode Application Note?
- How many transmit retries should I use in my application and what is the cost associated with more retires?
- Can I pair in vSP Mode with AT Interface Application
- Is there a way to minimize power consumption and optimize battery life in my AC4490/AC4790 application?
- Is there a way to distinguish between a BGX and Lyra module or device running Wireless Xpress in the field without having physical access to it?
- Does LWBx series support WPA3 OWE?
- Does IG60 support Greengrass V2?
- What is state of all nRF5340 pins when reset pin is held low?
- Does Lyra support Bluetooth LE Audio and/or the Low Complexity Communications Codec (LC3)?
- Can I use the LWB5+ module with antenna trace pin with just one antenna/UFL connector?
- Do I have to use hardware RTS/CTS handshake with the Laird BLE modules?
- Is SmartBASIC syntax highlighting available for other editors than Notepad++?
- Can I combine different sensor types on the BT610?
- What range should I expect between Bluetooth devices?
- Is there a difference between Lora and LoRaWAN?
- Can the RS186/RS191 be used in point to point mode?
- Where can I get BT610 internal production shipping battery documentation?
- How can Lairds LWB-series radios be used with Raspberry Pis and Raspberry Pi OS?
- What are the hardware design recommendations for the BL653/BL654 USB interface if not used?
- Why does my BLE module have an extra 01 in front of its MAC address?
Browse through over 1,320 answers by using the search box above or browsing to a specific product.