FAQs
Most Recent
- How do I set the APN when using Canvas Firmware?
- Is there a way to change the TX power in Infineon modules, IF573, LWB(5) and LWB(5)+ series?
- Does 60 series have plan to support LTE coexistence in firmware?
- Does IF573 support monitoring mode?
- In order to enable gpioset feature on a Linux platform, which packages need to be added by yocto?
- Does LWB5+ support ACS (auto channel selection) in AP mode?
- How to enable AP 11n mode with ST60 in openWRT
- Does ST60-2230C-P series support HCSL in PCIe REFCLK? If yes, which mode does it support?
- Does it need to have AC coupling capacitors in PCIe_TX, PCIe_RX or PCIe_CLK pins in IF573 M.2 card (453-00120)?
- What is the ITU code for Wi-Fi with WiFi/BT combo module?
- What is the ITU code for BT with WiFi/BT combo module?
- How can I make calls to the OS using Micro-Python enabled Canvas firmware?
- What key is the M.2 slot on the Universal SMARC Carrier board?
- Where can I find the pin mux options for Ezurio's (formerly Boundary Devices' / Laird Connectivity's) SOM and SBC products?
- What is the Orion Development Board?
- Where can I get the drivers for the BT851/BT850/BT860?
- I am looking for the BT852 USB drivers for Windows, but did not see them on the website, can you please provide a link?
- Does the IF820 Support iAP2 Applications When Using MODUSToolbox?
- How to activate SDIO on the M2 slot of the i.MX8 LPDDR4 DVK of NXP
- How to enable Direct Test Mode in BL563 module?
- What tools are required for RM126x module Hosted Mode vs Hostless Mode?
- How can I check the Vela IF820 DVK/Dongle RP2040 firmware?
- Can I use mcumgr with WSL or GitBash?
- Why am I getting an error in dmesg "brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50" when trying to start my Sterling-LWB5+ radio?
Browse through over 1,540 answers by using the search box above or browsing to a specific product.