Overview

The DCE series die cast aluminum enclosures from Laird Technologies are an innovative antenna system which gives the operator ultimate system flexibility.

 

The die-cast enclosure is available as a stand-alone enclosure, with an integrated low-gain antenna, or with a detachable high-gain panel antenna. Antennas are wide band for spectral flexibility. Radomes are UV resistant ASA plastic. Hardware is stainless steel. The antenna systems come with a pigtail cable with choice of connectors to adapt to any available radio equipment. There is a removable and customizable user mounting plate inside for mounting electronics. The antenna models come standard with Laird patented RJ45-ECS field replaceable ethernet connector feedthru.

 

The die-cast enclosure can be pole or wall mounted. A heavy duty tilt bracket is available for those installations requiring up or downtilt. Eleven (11) engineered knockouts are provided; 9 sized for N connectors and 2 sized for a cable feedthru.

Specifications

Antenna Type
Panel
Connector Type
Type N female
Dimension (Depth - mm)
51 mm
Dimension (Height - mm)
254 mm
Dimension (Width - mm)
254 mm
Frequency
2400-2700
Frequency Range (Max)
2700 MHz
Frequency Range (Min)
2400 MHz
Impedance (Ohm)
50 ohms
Input Power
100 W
Pattern Type
Directional
Polarization
Vertical
Radome
ASA
Typical Antenna Gain (dBi)
19
VSWR
1.5:1 (detachable antenna)
Weight
5.3lb (2.4kg) [die-cast enclosure] / 3lb (1.4kg) [detachable antenna]
Antenna Type Environment Frequency Range (Min) Frequency Range (Max) Gain (min) Gain (max) Connector Pattern Type Wi-Fi Ports
DCE10D-2419-NF Panel Outdoor 2400 MHz 2700 MHz 19 dBi 19 dBi Type N Female Directional 1

Documentation

Name Part Type Last Updated
ANT-DS-10x10-DCE 0915.pdf All Datasheet 01/17/2019