Surge Protector Series - SP6- LMR Accessories
Overview
The SP6 surge protectors offered by Laird are an integral part of any antenna installation involving the protection of sensitive equipment from surges caused by lightning. The ultra fast discharge design gives quick response to power surges and dumps the excess power safely to ground. Grounding is accomplished via a ground lug terminal or N bulkhead connector. The units have the ability to withstand multiple lightning strikes. The SP6 passes DC voltage so it is also suitable for those systems which pass DC power through the coax such as remote amplifiers. Construction is all plated brass to resist corrosion.
Specifications
Antenna Type
Antenna Accessories
Dimension (Length - mm)
60 mm
Input Power
max. 100
Other
Typical Frequency Range2400MHzMin insertion loss0.1dBTyp insertion loss0.2dBMax insertion loss0.4dBMin VSWR1.1:1Max VSWR1.4:1DC breakdown voltage230 VImpulse Breakdown Voltage (1 KV/uS MAX) 700Impulse Wave Discharge (5 times)10000 AInsulation Resistance (100 V) 50 Meg Ohm
VSWR
1.2:1
Weight
0.13 (kg), 4.5 (lbs)
| Dimension (Length - mm) | Weight | Input Power | Antenna Type | |
|---|---|---|---|---|
| SP6-230-BFF | 60 mm | 0.13 (kg) | max. 100 | Antenna Accessories |
| Dimension (Length - mm) | Weight | Input Power | Antenna Type | |
|---|---|---|---|---|
| SP6-230-BFM | 60 mm | 0.13 (kg) | max. 100 | Antenna Accessories |
Photo Gallery
SP6-230-BFF
SP6-230-BFM
Documentation
| Name | Part | Type | Last Updated |
|---|---|---|---|
| ANT-DS-SP6 0115.pdf | All | Datasheet | 01/17/2019 |
| ANT-DS-SP6 0115.pdf | SP6-230-BFF | Datasheet | 01/17/2019 |
| ANT-DS-SP6 0115.pdf | SP6-230-BFM | Datasheet | 01/17/2019 |