Support | Laird Connectivity

Blog Our Sentrius™ MG100 Gateway – Now an AWS Qualified Device!
White Papers How to Successfully Integrate a Wireless Module
Newsroom Laird Connectivity, in Partnership with Silicon Labs, Launches Advanced Bluetooth LE Module Series that Accelerates IoT Development
Blog Coming Soon: Advanced Bluetooth LE Module Series in Partnership with Silicon Labs
Blog Stay in Touch with the Zephyr Project Newsletter!
Videos WiFi 6/6E Series #1: An Introduction to WiFi 6 and 6E
Blog The Road to WiFi 6E Part 1: Introduction
Blog Now Available: Sterling™-LWB+ WiFi + Bluetooth Combo Module
Blog Coming Soon: Sentrius™-MG100/BT510/BT610 Cumulocity IoT Starter Kit
Webinars The Easy Button: Go from sensors to business outcomes rapidly with Cumulocity IoT and Laird Connectivity
Newsroom Laird Connectivity Launches Sterling™-LWB+ Wi-Fi 4 + Bluetooth 5.2 Combo Module Based on Latest Infineon AIROC™ CYW43439 Chipset
Videos Demo - our smartBASIC AT Command Set
Videos Episode 31: Introducing the Sterling™-LWB+
Brochures Wireless Connectivity Solutions - Brochure
Videos Episode 30: Introducing the Summit SOM 8M Plus
Blog Zephyr Project Grows with New Memberships and Design Commitments
Videos Getting Started with the BL5340 and the nRF Connect SDK
FAQ Should I used Broadcast mode or Addressed Mode?
FAQ With Laird RAMP radios, (CL4490/AC4490, CL4790/AC4790, LT1110, RM024) can I implement a design using just TX, RX and Gnd (three-wire interface) for UART?
FAQ I am able to test with the Development Kit hardware or ConnexLink Unit connected to my PC, but it does not work in my actual application, why not?
FAQ Are your RAMP radios (AC4490/CL4490, AC4790/CL4790, RM024, LT1110) UL Certified for applications in C1D2 Environments?
FAQ Can the firmware be updated on the AC4490/CL4490 or AC4790/CL4790 in the field?
FAQ I am not achieving the range documented in your manual, why not?
FAQ What is Sync-to-Channel and do I need it?
FAQ On the RAMP radios, what is the difference between "Broadcast Attempts" and "Max Transmission Retires"?
FAQ Does Laird have example code for a Windows Demo App which enables scanning and connecting to Bluetooth Low Energy peripheral IoT devices?
FAQ What factors influence the actual TX rate of the controller?
FAQ How do I return my ConnexLink Radio, AC4490/AC4790, RM024, LT1110 radio to its default settings, can I use Show Defaults?
FAQ Where can I find the appropriate arguments/parameters to use with the BleAttrMetadata() function used in many examples in the BL65x User Guide, as I only see BleAttrMetadataEx() listed which appears to have different arguments/parameters?
FAQ What is MU-MIMO?

Can't find the answer you're looking for?

Open a Support Ticket