Support We're here to help. Browse our FAQs, videos, and other resources to find the answers you need. FAQ Does the Sterling-EWB have a BT QDID host software stack reference? FAQ What kernel config should be set for ST60? FAQ For SSD45N/MSD45N in Linux platform, if during the regulation test, need to adjust 3dB in 2.4G, how to set this number during the driver initialization so that the TX power will match what they test in regulation test? FAQ How do I make the LWB5+ SDIO 1.8v work with an iMX8M DVK? FAQ How fast can the RS186/RS191 detect a change of the door magnet open/close sensor? FAQ Do I need any additional hardware for the BL5340 audio evaluation kit? FAQ Why is there no CONFIG_HOST_1 / STRAP_1 on my Sterling-LWB5+ solder down module? FAQ Is there an external IO pin on the IG60 Laird Linux I can use for my purposes? FAQ Can-I-use-my-PCIe-based-ST60-modules-from-Laird-with-on-the-NVIDIA-Jetson-nano? FAQ Can I find out the Cypress (Infineon) FW version number from a Sterling-LWB, -LWB5 or -LWB5+ software release? FAQ Is there a way to set the regulatory domain in Yocto? FAQ How can I update the smartBASIC app on the BL654 in my IG60-BL654 Laird Linux? FAQ How do I find out which clients are connected to the soft AP I created using my Laird Wifi module with Linux FAQ What UART baud rates are supported by the 60-series for downloading Bluetooth firmware to the module? FAQ Is there firmware flashed to my Laird Wifi modules that I need to update? FAQ How long do I have to keep the Sterling-LWB5+ in RESET? FAQ Can I really use one single firmware file for the various regions that my Sterling-LWB or Sterling-LWB5 module is certified for? FAQ What are all these firmware files for the Sterling-LWB5+? FAQ Can I use my Sterling-LWB5+ M2 card with a single antenna instead of using antenna diversity? FAQ How do I set the regulatory domain for my Sterling-LWB, -LWB5 and -LWB5+ module from release version 8.5.0.7 on? FAQ How can I talk to the BL654 BLE module inside the IG60 Gateway? FAQ How do I set up an open hotspot using Network Manager? FAQ Can I update the firmware of the BL654 module inside my IG60-BL654 Laird Linux gateway? FAQ Can I use 40MHz wide (or wider) channels with my TiWi5 module? FAQ I am getting the message "brcmfmac: brcmf_usb_dl_cmd: usb_submit_urb failed -19" - how bad is that? FAQ How to Exit a smartBASIC $autorun$ Application on the IG60-BL654 Gateway FAQ How can a enable/disable particular BLE channels used for advertising/scanning or when in a connection? FAQ How do I get started with Memfault? FAQ How can I diagnose and debug crashes and other issues with devices remotely without an FAE on-site? FAQ How can I measure the performance and health of my Pinnacle 100 / MG100 devices once they're in production? Pagination First page « First Previous page ‹ Previous … Page 2 Page 3 Page 4 Page 5 Current page 6 Page 7 Page 8 Page 9 Page 10 … Next page Next › Last page Last » Can't find the answer you're looking for? Open a Support Ticket