CL4790-1000-232-SP

In order to return the radio to its default EEPROM settings it is necessary to load a previously saved file containing the default settings to the Configuration Utility and write the changes to the radio. If you did not save the default settings to a file, prior to changing the settings, please contact Laird Support through the Support Portal to request a file with the default settings for the purpose of restoring the radio to its default configuration.

The "Show Default" settings view in the Laird Configuration and Test Utility should NEVER be written to the radio, as these are for reference ONLY. Writing these to the radio can result in corrupting the radio to a point where it can become unrecoverable. After viewing the "Show Default" settings, the radio settings should always be READ again, prior to writing any changes to the radio, to prevent this from occurring.

Configuring the RS232 and PRO variants of the Laird ConnexLink units (CL4490-1000-232, CL4790-1000-232, or CL4490-1000-PRO) requires connecting to a Windows PC via an RS232 serial port. As most newer computers no longer have an RS232 serial port available, an RS232-to-USB adapter would be required to connect the unit to the PC. Customers have reported success with the following RS232-to-USB adapters:

• FTDI RS232-to-USB Model: UC232R-10
• Tripp-Lite Keyspan RS232-to-USB Model: USA-19HS

Configuring the RS485 variants of the ConnexLink Units (CL4490-1000-485 or CL4790-1000-485) requires an RS485 adapter to connect to a Windows PC either via an RS232 serial port, or via USB. Customers have reported success with the following:

• B&B Electronics RS485-to-RS232 adapter Model: 485SD9TB combined with one of the above mentioned RS232-to-USB adapters
• ULinx RS485-to-USB adapter Model: 485USBTB-2W

The Laird Configuration & Test Utility Software along with the Laird Configuration and Test Utility Software - RAMP Modules User Guide, is available to download from the CL4490 and CL4790 Product Pages.

The -01, -02, -03 at the end of the part number signifies the version of firmware loaded to the module.
These firmware versions are Regionally significant and apply certified for the regions listed:

*RMC/C-Tick Certified modules/ConnexLink must be purchased through Tekdis as they hold the certification.